This chrome-plated 11′ C-Stand features a unique base with one leg that slides up and down the riser to accommodate uneven terrain.
This Matthews Hollywood Baby Junior Double Riser Stand has a wide 42″ footprint and rises to a maximum height of 9.6 feet. Can support heavy gear weighing up to 30 lb.
Clamps and holders
This clamp has spuds welded to the back edge of the clamp that allow for mounting to a C-stand.
An ideal solution for positioning foam core, reflector, or bead board.
A multi-use clamp which can hold small light fixtures virtually anywhere that the adjustable jaw can clamp over. The jaw is equipped with 12 rubber gripper pads.
This clamp can bite down on pipes and poles, allowing grips to mount lights in a tight or awkward position.
Designed to secure a sheet of foam core, styrene or other reflector board to the top of a light stand. Its mount allows it to be removed from the stand quickly.
Reflector Holder - Impact
This Impact Telescopic Collapsible Reflector Holder is ideal for mounting reflectors up to 60″ to a light stand. It mounts to any stand that has a 5/8″ diameter top stud.
Boom Pole Holder
A durable holder for fixed position microphone recording. This clamp and mount system allows for hands-free boompole mounting on C-stands and microphone stands.
Camera Handle - Handgrip
An ergonomic camera grip designed to provide a secure comfortable grip while shooting video with small-sized cameras.
Camera Handle - Cold Shoe
Can be mounted on the hot shoe of a camera for handheld shooting.
SHAPE Shoulder Rig
A 15mm rod, shoulder-mount solution designed for DSLR or other compact cameras and comes complete with a matte box and follow focus.
Handheld stabilizer that counteracts shaky hand motions, resulting in smooth footage. Designed to handle cameras in the 4 to 10 pound range.
Glidecam Stabilizer Vest Support System
For use with the Glidecam HD-4000.
Includes: A vest which can hold and evenly distribute the weight of the system across the operator’s shoulders, back, and hips. A support arm can be boomed up and down, as well as pivoted in and out, and side-to-side.
Hi Hat w/ Fluid Head
Perfect for capturing difficult low angle shots, the 2-section legs can extend down to just 3.1″ and reach up to 11″ in height. This tripod can hold up to 165 pounds, making it great for heavy cinema rigs.
Sony A7 Camera Cage
comes with follow focus and matte box
Designed for those who need to raise their camera’s viewpoint. The Spider Pod elevates you and your tripod two feet.
This 47″ Professional Camera Slider allows you to make smooth linear camera movements to your shots. Supports loads up to 19 lb but works best with loads up to 6.5 lb.
Delvcam 7" Monitor
A 1920×1200 px LCD monitor, which includes HDMI and 3G-SDI inputs, with HDMI/SDI cross converter outputs. Integrates advanced features such as waveform, vectorscope, and histogram displays to verify optimal video signals.
A compact recording monitor that has a built-in 7-inch 1920×1200 px touchscreen for monitoring framing, checking focus, and displaying scopes. It can record 4K video over HDMI and 6G-SDI to SpeedDrive SSDs.
ATOMOS Shogun Inferno 7"
A 7-inch 1920 x 1200 on-camera recording monitor. It utilizes 4K HDMI and 12G-SDI inputs to support clean output signals at resolutions up to UHD 4K (3840 x 2160) at 60 fps, recording it to 2.5″ SSDs using 10-bit, 4:2:2 Apple ProRes, and Avid DNxHR codecs. Includes 256GB SSD.
Teradek Bolt 1000 HD-SDI/HDMI Wireless TX/RX
A monitoring transmitter and receiver, which are equipped with both 3G-SDI and HDMI ports. Transmit uncompressed 1080p SDI or HDMI video wirelessly over 1000 feet line-of-sight.
Teradek Bolt Pro Tx/Rx
A monitoring transmitter and receiver, which wirelessly transmits an uncompressed HD video signal in up to 1080p60 4:2:2 as far as 300 ft with zero delay. The receiver features two 3G-SDI outputs for dual monitoring. The transmitter has a looping SDI output for local monitoring and a 70 minute internal battery.